Introduction

    • Shut down your computer. Disconnect all power sources before opening the computer cover or panels.

    • Remove the keyboard.

  1. vNQSSG3vaRBAbBs5
    • Disconnect the coin-cell battery cable connector from the system board connector.

    • Remove the coin-cell battery from the system board.

    • When you replace the battery, insert it at a 30-degree angle under the clip with the positive (identified by a plus [+] symbol) side up, and then push it into place.

    • Install the keyboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Hezekiah Brown

Member since: 11/02/21

6142 Reputation

0 comments