Introduction

This guide demonstrates how to disconnect the battery in your Dell Latitude 7410 laptop.

  1. ZGA51OPDJSxC2TYs
    • Use a Phillips screwdriver to loosen the eight captive screws securing the back cover.

  2. FLbNUScF6GTmQtVF
    FLbNUScF6GTmQtVF
    4AGQckNfxEpKoEKU
    • Insert an opening pick between the right edge of the back cover and the frame, just below the middle right screw.

  3. DTlPw2pqGIDkkYOf
    DTlPw2pqGIDkkYOf
    CUuCmdhYkBXTfkN2
    • Slide your pick along the right edge to release the clips securing the back cover.

  4. 1OHWpDCm1cXCoZYp
    1OHWpDCm1cXCoZYp
    slJJSckwBnuAAYor
    PYsuRNtnNHwJ6wCv
    • Insert your pick between the left edge of the back cover and the frame, next to the speaker cutout.

    • Slide your pick along the left edge to release the clips.

  5. x65QutnMkQPYHDWq
    x65QutnMkQPYHDWq
    XtCFfNqCafBooWsj
    UePh1xVQ2ittXubl
    • Insert your pick between the back cover and the right display-hinge to release the first clip along the back edge.

    • Slide your pick toward the left hinge until the second clip releases.

  6. qcvfJR5d3mXGNSqY
    qcvfJR5d3mXGNSqY
    EV6QgyotJEQ2Irhk
    • Insert your pick between the front edge of the back cover and the frame, just to the right of the bottom left screw.

    • Slide your pick toward the right edge until the front edge releases from the frame.

  7. oXxrAtcp2JqMPOsF
    oXxrAtcp2JqMPOsF
    GpA6xUysqbjJU5Fr
    • Remove the back cover.

  8. TyeDs4aNSeeQOfTG
    TyeDs4aNSeeQOfTG
    6VSAPrDuD1m6mYjw
    • Grab the black pull tab on the head of the battery connector and pull straight up to disconnect it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Clay Eickemeyer

Member since: 19/09/22

65190 Reputation

0 comments