Introduction

  1. GeLPJapxAhhnAjbp
    • Remove the following ten T5 screws securing the lower case to the upper case.

    • Two will be 6mm, eight will be 3mm in length.

  2. gPYpJoADSMUAWGhH
    gPYpJoADSMUAWGhH
    BHRYodonPfW1VTdQ
    • Wedge your fingers between the upper case and the lower case.

    • Gently pull the lower case away from the upper case.

    • Remove the lower case and set it aside.

  3. pHlUcyCOxvXlBwsY
    • Disconnect the battery cable.

  4. mo6NZxeGYkykKNKa
    • Use a PH1 (phillips) bit to unscrew four screws on the battery assembly tabs.

  5. PWwW2KfvQwGxvaoL
    • Take out the battery.

  6. FnEohgRnWgVFhwOf
    • Unplug battery from mother board

  7. XBYLp5eveKZ3sJSB
    • Pry off peripheral logic boards connected to motherboard.

  8. bWkA1tfonchdvtnh
    • Unscrew and remove Motherboard (6 x T6 x 3mm)

  9. RbPMaSfUuFTf5Gqt
    • Remove docking cable connecting motherboard to the frame

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dawson Burchak

Member since: 28/06/18

237 Reputation

0 comments