Dell Latitude 3500 VGA Board Replacement

Written By: Jake
  • Comments: 0
Dell Latitude 3500 VGA Board Replacement

Difficulty

Moderate

Steps

7

Time Required

No estimate

Introduction

  1. Q3BUtAU3uFWvDMJN

    • 10 screws hold the bottom cover in place -- these stay in the bottom cover.

  2. 3VW5KSiWZwWd3xYm

    • Using a spudger will make quick work of this step.

  3. JTeOOSsYVM6ieuSO

    • Disconnect the battery cable from the motherboard.

    • Remove the 4 screws holding it in place

    • Battery can now be removed from device.

  4. roKxmjE2GVKBGogE

    • Unplug the fan header

    • Unplug the VGA board cable

    • Unplug the LCD cable

  5. TxIFxpuXfWGJgiYN

    • Once these 2 screws are removed the fan will lift out as long as the cables are out of the way.

  6. 3GVnSQcKwsdlEEVM

    • Pull straight up from the motherboard

  7. xmTAruLdbZDWoeNY

    • 2 screws

    • Board can now be safely removed from device

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jake

Member since: 08/03/23

1300 Reputation

0 comments