Introduction

This guide can be used to replace the motherboard in the Dell Lattitude 3380.

The motherboard is the heart of the computer, and allows all other functions of your laptop to work the way they do. There are a few reasons why your motherboard might need replacing, such as age, overheating, power surges, and even manufacturer error. Regardless, the process for replacing will be the same.

Make sure your laptop is powered off, and you are in a safe controlled environment when performing this activity.

  1. FpCyVXYQ1DEZCVco
    FpCyVXYQ1DEZCVco
    eAFBPJ4jWBo3aSBG
    • Turn the laptop over so that the back is facing up.

    • Remove the nine 3 mm screws with a Phillips #0 screwdriver.

  2. 2lo1wHIWVdLpkwWZ
    2lo1wHIWVdLpkwWZ
    3UWwHbdWPTnjBCk5
    • Use an opening tool to pry the back cover away from the laptop.

  3. DwXxcLeJAWKFGMPy
    DwXxcLeJAWKFGMPy
    qN2ZQyNBvvoOqDyh
    4eeWKS2NDwMwdg61
    • Remove the four 3 mm screws holding the battery in place using a Phillips #0 screwdriver.

    • Disconnect the battery cable by gently pulling it out.

    • Remove the battery.

  4. YidlVXaqcpl3AcMf
    YidlVXaqcpl3AcMf
    eRYacSJjiHCUHofS
    CJBbh45swJWEHGZ4
    • Remove the 3 mm screw from the WLAN card using a Phillips #0 screwdriver.

    • Disconnect and remove the WLAN card.

  5. 6LGReSQrsW46E65P
    6LGReSQrsW46E65P
    FjfQmwXTrQ6iCEOy
    3A25tvyCtDJh1Uwb
    • Disconnect the audio cable.

    • Remove the entire audio card piece.

  6. vN5rcvHVrgQijEl5
    vN5rcvHVrgQijEl5
    bUWhUU3gWGtIBiAk
    UpBBkZYAuyOQxW4Q
    • Remove the two 5 mm screws from the fan using a Phillips #0 screwdriver.

    • Loosen the four captive screws on the heatsink using a Phillips #0 screwdriver.

    • Remove the heatsink from the motherboard.

  7. vuQCJjCEZYRS13xp
    vuQCJjCEZYRS13xp
    OQVT1BfVCB2vk1on
    • Using tweezers, loosen the power connector from the fan to the motherboard, fully disconnecting the fan.

  8. HdwYCPUY6VHQvkuZ
    HdwYCPUY6VHQvkuZ
    A6C6OU51FrTGiiVh
    tFM6FLXhCASPNVv2
    • Using a Phillips #0 screwdriver, unscrew and remove this metal plate.

    • Gently disconnect the cable under the metal plate.

  9. aOqS4NTWo6kUAAnn
    aOqS4NTWo6kUAAnn
    V2ADXRQ16nXNqwmk
    • Disconnect the battery power cable.

  10. xOiTPt1xgdQIhPkq
    xOiTPt1xgdQIhPkq
    b2GTNxEUGbOMnLCy
    • Disconnect the power cable that connects to the charging port.

  11. xUdB1aLAXKPIKSOI
    xUdB1aLAXKPIKSOI
    sOwouK2HJeMfS53H
    • Disconnect the touchpad cable.

  12. 2j6iHgFBSuRIvtNS
    2j6iHgFBSuRIvtNS
    bYNvFJdZxv5iksQV
    • Remove the five screws from the motherboard using a Phillips #0 screwdriver.

    • Remove the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Charlie Tracey

Member since: 21/02/23

313 Reputation

0 comments