Dell Inspiron 700m Hinge Cover Replacement

Written By: irlanda
  • Comments: 0
Dell Inspiron 700m Hinge Cover Replacement

Difficulty

Easy

Steps

6

Time Required

No estimate

Introduction

  1. elgtXsD2YaYSBTnE

    • Remove the battery by sliding and holding the battery release latch.

    • Make sure your computer is turned off and unplugged.

  2. O1kgaCNUHPQTRVrC

    • Open the display 180 degrees.

  3. kraBJnifBsiRyXd1

    • Use a plastic flat screwdriver to slide the hinge caps away from the computer.

    • Detach the two display latches on the back of the computer.

    • Use plastic flat screwdriver to carefully pry up the latches on either side of the hinge cover

    • Carefully, lift the hinge cover from the main unit and remove it from the main unit.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

irlanda

Member since: 30/11/17

11336 Reputation

0 comments