Introduction

  1. uPA3EBnUIlRgZ3Jj
    • Close the lid and turn the laptop over to access the back cover.

  2. PUls52VpKZ2RZ3Cs
    • Remove the five 4 mm screws from the back of the laptop using a Phillips #0 screwdriver.

    • Loosen the two remaining captive screws using a Phillips #0 screwdriver.

    • Captive screws tend to have a slightly larger head than normal screws, so it is important to use the correct size screwdriver to avoid damaging the screw or the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kristen Gismondi

Member since: 12/11/14

81237 Reputation

0 comments