Introduction

In this guide, we will be showing you how to remove and replace the Hard Drive.

  1. kspEiQO2CDlJ1yle
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

    • WARNING: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • CAUTION: Hard drives are extremely fragile. Exercise care when handling the hard drive.

    • Remove the two screws that secure the hard-drive assembly to the system board.

  2. QseX2YRUFV4OBr31
    • Slide the hard-drive assembly to disconnect it from the connector on the system board.

  3. uc4O1uBvDCQkAkIH
    • Lift the hard-drive assembly away from the system board.

  4. 6NKuISgdIW3qVbXx
    • Remove the four screws that secure the hard-drive bracket to the hard drive.

  5. LBEN2tjEoImtuSBL
    • Lift the hard-drive bracket off the hard drive.

  6. Vkfbbn3X2V1EvsbD
    • Align the screw holes on the hard-drive bracket with the screw holes on the NEW hard drive and replace the four screws.

  7. 1uvC5jXUtPkgD3HX
    • Slide and push the hard-drive assembly to connect it to connector on the system board.

  8. AFwEX6fCJSRN6DZb
    • Replace the two screws that secure the hard-drive assembly to the system board.

Terrence15

Member since: 18/12/17

79034 Reputation

0 comments