Introduction

This guide will show you how to replace the speakers of your Chromebook. This is a very straightforward and easy repair.

  1. kK2ZURg2UJNDnSxP
    • Set your laptop upside down on your work space.

    I usually skip most all of this and start with the bezel, disconnecting the screen wire AT THE SCREEN, and not at the motherboard. 4 screws around the bezel, and 4 screws in the screen. Leave everything connected and skip to step 12.

    Denton Holland -

  2. SroJvXMZOGPYBNm3
    • Using tweezers, remove the circular stickers that are covering the two screws near the middle of the back cover. Stick them to the laptop next to the screws.

    -coordinate color of bullet points with markup

    -perhaps say "...in the middle of the back cover" instead of "at"

    Daniel Leon-Gijon -

  3. F5gT6g6IIH5hyGTA
    • Using a Phillips #0 screwdriver, loosen all seven 2.5mm screws on the back cover of the device.

    • These screws will stay attached to the back cover, so just loosen them until they rattle around.

    -coordinate color of bullets with markup

    Daniel Leon-Gijon -

  4. SFwKeE14cNHYLkYE
    • Using a plastic opening tool, begin to separate the back cover from the body of the computer.

    • If you have trouble prying a particular part of the back cover off, make sure that the nearest screws are fully loosened.

  5. GytiuSLFBHZClcbZ
    • Using your hands, pull the back cover fully off of the body of the computer.

  6. ogjFlGmE4w4EoA6L
    ogjFlGmE4w4EoA6L
    Oe2WHOlKXGkYMC1C
    pGlVFDKyYHLWZgPj
    • Locate and gently pull the wire harness (small plastic box with wires leading to black audio speakers) directly out of the connector on the motherboard.

    • Some components are not shown in pictures for simplicity. There is no need to remove any of the missing components to successfully remove the speakers.

  7. BXuWLBoqFNIP1xTR
    BXuWLBoqFNIP1xTR
    ua1YHoGEFlOT1H1k
    ODIHrBs6BpRVmgOR
    • Remove any existing tape attached to the audio wire you unplugged in the previous step.

    • Gently lift and remove speakers.

    • No screws should be removed

Conclusion

To reassemble your device, follow these instructions in reverse order.

George Erie

Member since: 26/04/17

327 Reputation

0 comments