DeWalt DCS380 shoe and boot removal

Written By: Jonathan Hicks
  • Comments: 0
DeWalt DCS380 shoe and boot removal

Difficulty

Easy

Steps

3

Time Required

4 minutes

Introduction

Disassembly of shoe and boot for later repair of gearbox or blade release lever.

  1. RRLo1dhg2PMMGtIS

    • Remove the battery before disassembly.

    • Remove the shoe by pressing the yellow button on the left side of the hand grip.

  2. CrgwddNJNa4HqtHH
    CrgwddNJNa4HqtHH
    1RCobgBs4GMSyq3M

    • Remove the two M8x18mm T20 bolts from the front plate.

  3. FnRa4Fm6CqHC1Nxl

    • Pull the front of the grip while holding the saw body in place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jonathan Hicks

Member since: 17/01/19

725 Reputation

0 comments