D-Link DCS-2630L Wi-Fi Camera Speaker Replacement

Written By: Collyn Dodge
  • Comments: 0
D-Link DCS-2630L Wi-Fi Camera Speaker Replacement

Difficulty

Moderate

Steps

7

Time Required

4 minutes

Introduction

  1. hLwYGfObSXddJLo6

    • Remove the two 9.65 mm screws on the back cover using the Philips head PH00 screw driver.

  2. syVABDNMBxmuJD1n

    • Remove the back casing to expose the circuit board.

  3. sW5fNqyQUiZkstyj

    • Detach the gray antenna wires by gently pulling on the side closest to the circuit board.

  4. E3Yp12gHBI3Or6uo

    • Detach the speaker wire by gently pulling on the side closest to the body of the camera.

  5. TZ6jJ56Eysw6X2ky

    • Remove the two 7.25 mm screws using the Ph00 head.

  6. HG3uRfsAJhlPjaWF

    • Remove the back grey speaker plate

  7. Zmri5BcDIDBBRyGC

    • Remove the speaker by gently pulling on the wire near the speaker.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Collyn Dodge

Member since: 21/03/18

323 Reputation

0 comments