Cuisinart TOA-60FR Function Switch Replacement

Written By: TRiels
  • Comments: 1
Cuisinart TOA-60FR Function Switch Replacement

Difficulty

Moderate

Steps

8

Time Required

No estimate

Introduction

This guide will instruct you on replacing the function switch that toggles between the "warm broil","Broil","toast","Bake" and "Bake Air fry" functions.

  1. FQiIK633HA1xH2J5

    • Using a 25-hexagon head, unscrew these 7.31 mm three screws.

  2. 2ZKKRuyXQrXNBS4X
    2ZKKRuyXQrXNBS4X
    tH4XieoeMHA5iIjk

    • Using a Phillips #1 screwdriver, remove all these 7.31 mm screws.

    • Pull off the back.

  3. AKcjop32RlEsvEAl
    AKcjop32RlEsvEAl
    QZmMhdTAgfCNuAnc
    UDj5E2drGCNfRgbt

    • Flip the oven upside down.

    • Pick the grey stoppers out with a sprudger.

    • Using a Phillips #1 screwdriver, remove these three 11 mm screws.

  4. H4nftFS6vMtLCHj1
    H4nftFS6vMtLCHj1
    rWWfQKTRDMOSsWXm

    • Unscrew all of the 11.05 mm screws that connect the outer shell to the device.

  5. ItHgCPkSurRHJUcK
    ItHgCPkSurRHJUcK
    wfC2r4SAdcqOZmT2
    ofKmDrmHAjC5TQPR

    • Pull the top piece off.

    • Push down before pulling up to release the tabs.

  6. lxjlVnUgXZJMCwTG
    lxjlVnUgXZJMCwTG
    bCsbigtJMtBZ4oIp
    H6EXNyGKREMfXQAK

    • Inside of the device locate the function switch and remove the indicated screws (4.97mm).

  7. fDZ6WTByaRXK13Ku

    • Unclip all connections.

    • Rotate function knob to broil so plastic tab is visible. Use screwdriver to push tab down and pull knob out from front side.

    • Remove 2 screws revealed under the front knob

    I got to this point and can’t figure out how to remove the switch entirely - I have a replacement but can’t get the full switch removed from the knob

    Stan Hung -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

TRiels

Member since: 08/09/23

97 Reputation

0 comments