Cuisinart DLC-10S Pro Classic 7-Cup Food Processor Internal Wiring Replacement

Written By: Riley Carns
  • Comments: 0
Cuisinart DLC-10S Pro Classic 7-Cup Food Processor Internal Wiring Replacement

Difficulty

Moderate

Steps

6

Time Required

10 - 20 minutes

Introduction

  1. FZOBMEfHgRFL2Aqh

    • Remove the four screws from the bottom of the processor with a Philips Screwdriver.

  2. RJZSJD1ZmhNddJDm

    • Remove the bottom casing of the processor.

  3. DaFCoPXgAHe2hpmX

    • If any wires are frayed, cut them off where they are connected by wire nuts.

  4. jQBktCWIKTwCvHPq

    • Detach the wire nut from the other connected wires.

  5. URET6qucsPuWkqTY

    • Replace the bad wire with a new one of the same gauge.

  6. XHCnGWNk1TuMjXpR

    • Strip the new wire to the same length as the other wires and connect them to a wire nut.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Riley Carns

Member since: 02/04/15

279 Reputation

0 comments