Corsair Katar Disassembly

Written By: Ryan Matesa
  • Comments: 0
Corsair Katar Disassembly

Difficulty

Easy

Steps

4

Time Required

5 - 10 minutes

Introduction

If you need to disassemble your Corsair Katar mouse, this guide will demonstrate how to take it apart.

  1. Gomf6h1ntJAswYs6
    Gomf6h1ntJAswYs6
    DH4TgqdDULXjmsFA

    • Unplug your mouse before starting.

    • Flip the mouse over so the bottom is facing up.

  2. sAPDavweVwYGGRWp

    • Remove the three skates on the bottom of the mouse using the plastic opening tools.

    • Skates will be very sticky.

  3. L2sCyOVNb6wQ2xMZ
    L2sCyOVNb6wQ2xMZ
    VZ3siD2owmXEs5oE

    • Use the JIS 0 screwdriver to remove the four 5 mm screws on the bottom of the mouse.

  4. OpMQYwOdujvupbiW

    • Detach the bottom of the mouse from the upper shell.

    • Remove the shell slowly so as not to damage the white DPI cable inside the mouse.

    • Use the plastic opening tool to detach the white DPI sensor cable from its port.

    • Alternatively, you can use your hand to remove the DPI sensor cable by wiggling it out of the port.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ryan Matesa

Member since: 12/07/18

248 Reputation

0 comments