Compaq Evo N1000v LED Cover Replacement

Written By: kim
  • Comments: 2
Compaq Evo N1000v LED Cover Replacement

Difficulty

Easy

Steps

8

Time Required

5 minutes

Introduction

A guide on how to remove the LED Cover.

  1. IVp4JMGehWTGhukw

    • Flip the laptop over with the rear panel facing forward.

  2. 26AHyZ1XSHKnZYXF

    • Using a TR8 Torx screwdriver, remove the two T8 Torx screws that secure the LED cover to the base enclosure.

  3. UXcadkOxJwyrQcPb

    • Flip the laptop back over with the front facing forward. Open the screen.

    This step could likely be removed.

    H. Nye -

  4. YTd2GKBUeVY3eFqc

    • Locate the F1 and F2 keys near the top left corner of the keyboard.

    This could be where to tell users to flip the computer over and open it if that is deemed necessary.

    H. Nye -

  5. ikVXSlZLmHrBqjhT

    • While holding the F1 and F2 keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

  6. QOjYJBvPVIjoO3RJ

    • Locate the Scroll and Pause keys near the top right corner of the keyboard.

  7. e1JGuqmvftoRZdBG

    • While holding the Scroll and Pause keys, insert a spudger between the keys into the notch in the LED cover. Lift up.

  8. imX4T24lhWwLlnSM
    imX4T24lhWwLlnSM
    3P1QWubE5kGIHTcC

    • Insert a spudger between the F7 and F8 keys. Lift up to remove the LED cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

kim

Member since: 14/04/10

59 Reputation

0 comments