Introduction

This guide will walk you through removing the buttonboard. Removing the buttonboard will give you access to the buttons and the display screen.

  1. XlwqXpZDjPunEatF
    XlwqXpZDjPunEatF
    eQDPk3gdqt2YITML
    • Remove the four 9.5 mm Phillips #0 screws from the back of the device.

  2. YVQZIquXSLEtGFAM
    YVQZIquXSLEtGFAM
    eJnDfLTqM3fTo1xE
    • Pull the black plastic back case off of the device.

  3. eDnd1jveGsFaLqJ1
    • Lift up the motherboard and lay it flat next to the device.

    • Be careful not to sever the wires. The buttonboard is connected to the motherboard by the wires.

  4. DAL6qIMhXESf2eBb
    • Remove the windshield bracket mount.

  5. TFNYoVwPVpPE1fRy
    • Remove the four 4.8 mm Phillips #00 screws from the buttonboard.

  6. V16ehJHEEjV15mhk
    • Lift buttonboard to expose silver button plate.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Megan McDonough

Member since: 25/09/15

113 Reputation

0 comments