Cobra MR HH350 FLT Motherboard Replacement

Written By: Jason Nguyen
  • Comments: 0
Cobra MR HH350 FLT Motherboard Replacement

Difficulty

Moderate

Steps

7

Time Required

5 minutes

Introduction

This guide will teach you how to remove and replace the motherboard on your Cobra MR HH350 FLT Radio.

  1. MEOZAAATSUfUf2WC

    • Remove the 11mm screw at the bottom of the radio with a #4 flathead screwdriver.

  2. OJxnOVrBriVvUekF

    • Remove the battery from the radio.

  3. XXOd1kafqKnUSYl2
    XXOd1kafqKnUSYl2
    KZmXKgBPKRwcoUes

    • Remove the 6 rubber stoppers using tweezers to reveal screws.

  4. 6Cg3F1IsAMSwA3na

    • Remove the 6 10mm screws that were behind the rubber stoppers with a #0 Phillips screwdriver.

  5. ifPe1uhhZVyBdRGV

    • Remove the cover to expose the motherboard.

    • Pull off the power nob at the top of the radio.

  6. fbS42caFAGBfWd5X
    fbS42caFAGBfWd5X
    OCR3NagMCwZkNraZ

    • Remove the 2 6mm screws on the motherboard with a #0 Phillips screwdriver.

  7. XDKihZZHYV6VifeN

    • Remove the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jason Nguyen

Member since: 08/09/23

305 Reputation

0 comments