Chefman RJ-38-V2-35 Fryer Basket Replacement

Written By: Benn Rutledge
  • Comments: 4
Chefman RJ-38-V2-35 Fryer Basket Replacement

Difficulty

Very easy

Steps

3

Time Required

5 - 10 minutes

Introduction

If your Chefman RJ38-V2-35 air fryer basket is not snapping into place properly, here’s how to replace the clips on the basket. This is a quick and easy guide with no special tools required.

  1. 6UcQ14QdJfy4RecE

    • Make sure the air fryer is unplugged and the basket is cool enough to handle.

    • Remove the basket from the air fryer.

  2. bq6HfDmKuEs3gwIm

    • Place the fryer basket on a flat surface.

    • Using the Phillips #1 screwdriver, remove four 5mm screws on the inside of the fryer basket (left two screws shown).

  3. NJtEBGjXjJBRUxLa

    • Separate the handle from the basket.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Benn Rutledge

Member since: 17/10/18

127 Reputation

4 comments

I need the plate inside the basket. The coating is coming off, Is it safe to use?

Eileen Morrison -

Where can I buy only the basket or just the plate? I need replacement but don’t seem to find the parts…

Eszter Stranszky -

I need the plate inside the basket. Coating is coming off.

Sandy Mentzer -

Where can I buy replacement rubber feet for the fryer basket plate? Mine came off and went down the disposal!! Are they required for proper heating and frying??

Betty Johnson -