Introduction
Disassemble the carburetor on a Briggs and Stratton 5.5hp engine
-
-
Use a 5/16 socket or flat head screwdriver to remove the first bolt. Pull the cover off and remove the air filter.
-
Remove the 3 bolts using a 5/16 socket. In addition, pull the breather hose off the assembly at the bottom left. Now pull the cover off.
-
-
-
Remove the two bolts holding the carburetor to the engine with a 3/8 socket or wrench.
-
Remove the spring boxed in red from the hole. Pull to left of carburetor, towards the link the other end of the spring is around.
-
The link will be connected to the carburetor. Pull the carburetor off in an "S" motion and remove it.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
