Canon ImageCLASS MF4350d Scanner Disassembly

Written By: Tanner Papenfuss
  • Comments: 1
Canon ImageCLASS MF4350d Scanner Disassembly

Difficulty

Easy

Steps

5

Time Required

15 - 30 minutes

Introduction

  1. BWcJaWd264SKrprF

    • If at any point you see glass that seems cracked or broken, handle with care. Broken glass is sharp and can cause serious damage.

    • Lift up the lid. Then be sure to examine the glass. If there are any cracks or broken fragments handle with extreme care.

  2. E3ARVE5mZQqFQlVG
    E3ARVE5mZQqFQlVG
    GHD4FlxyvRUOaEdD
    iKOPFoc2wZGNRFjb

    • Locate the black and white hinges.

    • Gently lift out the black and white hinges.

  3. WODYpuWwchVywakQ
    WODYpuWwchVywakQ
    fWgRvqluT3YRGMrL
    Bbs4mRAJYgl6DHJQ

    • Next, locate and remove the four 10mm screws.

  4. QOG5LD11ZNYGPAaW

    • Gently, pry off the top plate, starting from the back of the printer.

  5. qHtlBb42Hth6cJOn
    qHtlBb42Hth6cJOn
    AATwKB3nHCWxyirU

    • After you have taken off the plate, check to make sure that there is no broken glass. If there is broken glass handle it with gloves. Broken glass, if handled improperly, can cause physical injury.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Tanner Papenfuss

Member since: 30/09/13

560 Reputation

One comment

The paper tore and is now not visible. How do I remove the printer's components to access the paper deep in the machine? Is there a method to factory reset the machine? Can I somehow make the rollers rotate to attempt to pushing the paper out?

Kyle -