Canon EOS 30 Strap Loops Replacement

Written By: Alexander Gonzalez
  • Comments: 0
Canon EOS 30 Strap Loops Replacement

Difficulty

Easy

Steps

6

Time Required

20 minutes

Introduction

The strap loops can be safely accessed and removed.

  1. mE64gtuBpWdshJaa

    • Slide the outer eyepiece upward to remove it.

  2. NFZJAjvj4maqofiX

    • Remove the two 4.75 mm black screws located on the top of the camera.

  3. YP5DkaZKpZZpM22p

    • Remove the four 4.3 mm black screws near the bottom corners of the eyepiece at the back of the camera.

  4. UhnbNqYUoPMxWQGJ
    UhnbNqYUoPMxWQGJ
    fIIYRJmwdZZSkHVc

    • Slowly separate the top panel from the camera by pushing it upward.

    • Separating the top panel too far or quickly can damage the ribbon cable and connecting wires that are still attached to the top panel of the camera.

  5. kyoXHLIDqUWNlHp3
    kyoXHLIDqUWNlHp3
    q5Kx1Co5s2WuKJnn

    • Remove two 5.9 mm silver screws on top of camera to detach left strap loop (opposite grip).

  6. ONpCHpXuistOyZg2
    ONpCHpXuistOyZg2
    FYfKNI6IKImwEbom

    • Remove one 8.5 mm silver screw (front) and one 5.45 mm silver screw (back) to remove strap loop near LCD screen.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Alexander Gonzalez

Member since: 17/04/11

15 Reputation

0 comments