Canon EOS 30 Remote Control Socket Replacement

Written By: Antonia
  • Comments: 1
Canon EOS 30 Remote Control Socket Replacement

Difficulty

Moderate

Steps

13

Time Required

25 minutes

Introduction

The Remote Control Socket is not difficult to access. However, it's connections are soldered, so it will be difficult to remove.

  1. TGVWrjnYLtjkMFA2

    • Remove the two 4.8 mm black screws above the lens on the front of the camera.

  2. IPLNHYPpHmCOHSJf

    • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

  3. SBZy1TStnuPPdPea

    • Remove the 4.8 mm black screw on the left side of the camera.

  4. DUJQI5mCdYhWNZHR

    • Remove the front panel by lifting it away from the camera's body.

    I need a video tutorial

    Abdullah dicky S -

  5. DpORiUgiQ21PZJPL

    • Remove seven 4.25 mm black screws on the bottom panel.

  6. aP5bpgQgLZ1EBByL

    • Remove the bottom panel.

  7. rHyyEu3oIHwOny22

    • Remove two 6.5 mm black screws from the panel.

  8. K2vWseLlnxl2rlrf

    • Remove the plastic remote control socket cap by pulling it straight out.

  9. XFBquRyNGIhOJyHt
    XFBquRyNGIhOJyHt
    eUUSqZTdNYZJLwxB

    • Slide the panel toward the bottom of the camera to remove.

  10. dIZpUQcqWNy3H5Il

    • Remove the single 4.8 silver screw from the control socket.

  11. yp4rknNv6wKta1Pr
    yp4rknNv6wKta1Pr
    jEeqoIxhBamJnJpN

    • The control socket is now secure by three wires.

    • Desolder connections to replace the remote control socket.

  12. LewDfEBEgNpJOG2g

    • Remove one 4.8 mm silver screw securing Remote Control Socket to camera.

  13. IeMZTX1TFdKdbFns
    IeMZTX1TFdKdbFns
    eorBbwpeSufVDvdc

    • Remote Control Socket is now secured by 3 wires.

    • Desolder connections to replace Remote Control Socket.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Antonia

Member since: 17/04/11

124 Reputation

0 comments