Brown multipractic timing belt replacement

Written By: VauWeh
  • Comments: 6
Brown multipractic timing belt replacement

Difficulty

Very easy

Steps

5

Time Required

10 minutes

Introduction

If the engine is running on your Braun food processor, but the drive shaft is not rotating anymore or just stuttering, the timing belt connecting the motor to the shaft may be damaged. He is easy to exchange.

  1. OvyLYJONQNr6sheh

    • Remove the stirring container.

    • Turn the machine upside down

    I would like information of how to remove the shaft? This is very nice how you show to remove the belt but I need to remove the shaft please show me

    Elizabeth Penner -

    Please I will look for information for so long already how to remove the shaft?

    Elizabeth Penner -

    Plz show circket wiring

    Mirwise -

  2. kytpHKX4IG1Xcsmh
    kytpHKX4IG1Xcsmh
    im5kporKQlBArZWl

    • Sometimes the screws are hidden under the rubber feet. Then you have to pull them out.

  3. vLNYKHDTMMnPEJrl
    vLNYKHDTMMnPEJrl
    iyXoklxrbKBS6BiF

    • Unscrew the screws on the bottom plate.

    • Take off the bottom plate.

  4. wTKJGEfMxsUTpwXA
    wTKJGEfMxsUTpwXA
    so1hcQ1APZcwFJvR

    • Clearly visible: the timing belt is touched!

    • The timing belt size is printed. In this model multipractic it is one of the type 190 XL 037.

    • With the right name it is easy to buy.

    Can anyone help us find a large drive wheel for a Braun food processor - like in the picture above?

    meshekelaine -

    Try at Braun Service Germany. Good luck.

    VauWeh -

  5. EEmNHVAtCspWg2UF

    • The new belt is laid on. First on the small drive wheel, then on the large drive wheel, sit there on one side and spin once.

Conclusion

Repeat the steps in reverse order to reassemble your device.

Author

VauWeh

Member since: 19/10/15

199756 Reputation

One comment

Any guide for replacing belt for Braun Fx 3030 processor

Sajith kakkattil -