Briggs and Stratton 675 Series Repair Air Filter Replacement

Written By: Taichi Nakahara
  • Comments: 2
Briggs and Stratton 675 Series Repair Air Filter Replacement

Difficulty

Easy

Steps

3

Time Required

5 - 10 minutes

Introduction

Removing the air filter is really simple. It only takes one one screw to be removed and the rest can be done with your hands. The air filter should be replaced annually.

  1. DBQrjAvrFVvBDQFa

    • Make sure the the engine is off and the spark plug wire is removed and away from the spark plug before beginning.

    • Use a Flathead #4 screw driver to remove the 40mm screw that holds the air filter case in place.

  2. JOfOZB6xTjPbAZHP

    • Use your hands to pull the air filter case out of the hinge at the bottom.

  3. HgjMBFllrJJmZXVC

    • Simply remove the air filter with your hands.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Taichi Nakahara

Member since: 02/02/15

397 Reputation

2 comments

Good information, although it didn't resolve my issue. Thanks for sharing

all2thegoodpromo -

This is a power wash motor water will not come out

hdoggett Doggett -