Breville JE98XL Juice Fountain Plus Lid Replacement

Written By: Kurt Wacker
  • Comments: 0
Breville JE98XL Juice Fountain Plus Lid Replacement

Difficulty

Very easy

Steps

5

Time Required

1 minute

Introduction

Make sure the device is off and unplugged before every disassembly.

  1. diWfKLZuijhyC2Tw

    • Place the juicer on a flat surface. Make sure the juicer is unplugged and in the "off" position. For the following steps, the pulp basket is on the left.

  2. PlaoZU1UexMr3412

    • Tilt the juicer slightly to the right so the pulp basket is off of your surface.

  3. EhECqC5rePWvHJDJ

    • Pull the pulp basket down and out from under the juicer cover.

  4. nnsRL2wYCPCoYLBL
    nnsRL2wYCPCoYLBL
    QQp5eiooUDad44Zi

    • Place one hand on either side of the safety locking arm.

    • Disengage the locking mechanism by pulling down on the lever with even pressure. The lever should be free to move up or down once it has been properly disengaged.

  5. 4hKZbvfAQWSIn1DU
    4hKZbvfAQWSIn1DU
    BHSSWFP5WnGlAUsQ

    • Firmly grip both sides of the juicer. Twist clock-wise and lift to remove the lid.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kurt Wacker

Member since: 06/10/16

207 Reputation

0 comments