Introduction
This guide will show how to remove and replace the nichrome wire (heating wire) of the Brentwood TS-292B.
-
-
Remove the five screws to loosen the the outer housing from the internal components.
-
Pull up on the black plastic housing until it is dislodged from the base.
-
-
-
You will need to remove the toasting lever by removing the black tab from the lever.
-
You will now be able to completely remove the housing from the base of the toaster.
-
-
-
You will need small chain nose pliers to check for slack on either end of the broken wire.
-
If there is no slack in the wire, you must buy extra nichrome wire in order to fix your toaster.
-
-
-
Pull the slack out of the wire and pinch the two ends of the wire together.
-
Gently twist the two ends of the wires together to establish a connection.
-
To reassemble your device, follow these instructions in reverse order.
