Bose SoundDock Portable v2 Remote Battery Replacement

Written By: Brodie Sutherland
  • Comments: 1
Bose SoundDock Portable v2 Remote Battery Replacement

Difficulty

Very easy

Steps

2

Time Required

1 minute

Introduction

This guide shows you how to replace the battery in your remote

Tools

  1. RPw5bFAlBcHnp6wN

    • Using a quarter, turn the battery cover 1/8th of a turn counterclockwise.

  2. yJmX2GE6AZ44M5G2
    yJmX2GE6AZ44M5G2
    P1LPHVShFccLXhGD

    • Remove cover and battery. The new battery should be placed with the positive (flat) side facing up.

    • The correct battery for your remote is a CR2032. You may also use a DL2032.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Brodie Sutherland

Member since: 14/04/15

303 Reputation

One comment

We have a Bose Wave radio w/remote. This remote is not the one shown here with a screw for the battery compartment. It's the type w/a sliding holder for the battery on the south end (bottom of the battery). Someone went to replace the battery and shoved the holder in upside down I believe. Consequently the holder will not come out all the way.

There must be a way to get it out without forcing it. There's a pinch clip you have to either squeeze or move to the left to disengage it from the locked position and free it up. Any ideas as to how to accomplish this? We appreciate a reply back so this would make our Christmas better.

Merry Christmas & Happy Holidays! Cheers!

asbirdiesingh -