Blackberry Key 2 LE Keyboard Replacement

Written By: Crystal Loomis
  • Comments: 0
Blackberry Key 2 LE Keyboard Replacement

Difficulty

Moderate

Steps

18

Time Required

35 - 50 minutes

Introduction

If the device keyboard is not responding ;use this guide to start the replacement process.

  1. RnbWapDTJLp2DWG6
    RnbWapDTJLp2DWG6
    bau6hlKh3oCrGO64

    • Turn off your device before starting.

    • Flip the phone over so that the back camera is facing you.

  2. f3qYARdJhbsyX6w6
    f3qYARdJhbsyX6w6
    ITiV1CS1FImQFEkQ
    gqUIRVeQUIkLatEd

    • Use a your hands to remove the backing of the phone.

    • Use your phillips screwdriver to begin removing all the accesible screws.

    • Now begin to remove the coverings above and below the middle plate with your hand.

    • use your hand or a tool to remove the tabbing on the metal plate covering the battery.

    • Remove the metal plate covering the battery.

    • Use your wedging tool to begin removeing the adhesive under the battery.

    • Remove these two screws with your phillips screw driver.

    • Open the two metal tabs

    • Flip the phone back over with the screen facing you.

    • Begin to use the wedging tool to remove the space bar off of the keyboard.

    • remove the screws on each end of the space bars vacant lcoation.

    • Grab the wedging tool and begin wedging the old keyboard.

    • begind wedging the back of the keyboard until free.

    • Begin deperating the keyboard from the backing.

    • grab your replacement keyboard and connect it to the backing of the old keyboard.

    • place the keyboard back onto the front of the phone

    • once placed, hold the keyboard onto the phone while clicking the two metal plates back down to connect the keyboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Crystal Loomis

Member since: 22/01/18

732 Reputation

0 comments