BlackBerry Curve 8900 Battery Replacement

Written By: Renae Bishop
  • Comments: 4
BlackBerry Curve 8900 Battery Replacement

Difficulty

Easy

Steps

2

Time Required

30 seconds - 2 minutes

Introduction

Few tools are required to do this.

A small plastic pry tool or even a fingernail is sufficient. Working area surface should be clean and dry with adequate lighting.

Immediately wash hands after handling the battery and completing the process. Discard the dead battery properly.

  1. KtKHZFEGNSqTtlRr

    • Remove the back cover of the phone.

    • The battery will now be visible.

    Pry off the back and separate it from the front of the phone case. You should see the battery once you pry the back off.

    (rewriting the second sentence)

    You will see the battery once the cover is removed.

    Aubrey -

  2. ufCyrX5OKlHKDEk5
    ufCyrX5OKlHKDEk5
    BuvrClTTVhUSYi3k

    • Pinch the battery at the grey semi-circles on the top left and top right corners of the battery using your fingers and remove it from the device.

    On both sides of the battery, there is a lighter grey half-circle. This is the best place to use your fingers to gently lift the battery free of the housing. Set aside the old battery, then replace it with the new battery. It should easily fit into place.

    (deleted "it sits in") from second sentence

    Aubrey -

    Replace backing of phone, pressing gently to secure to back of phone case ( There seems to be a bit of repetition in this sentence so I rewrote it.)

    Reattach the back cover by pressing gently until cover is secure.

    Aubrey -

Conclusion

Set aside the old battery, then replace it with the new battery. It should easily fit into place. Then, you can replace the backing of phone, pressing gently to secure it down.

Author

Renae Bishop

Member since: 08/09/11

68 Reputation

One comment

were do i get one

Hooman Afshari -