Introduction
The nozzle brush located on the end of shaft may break off during the cleaning process. Replacing the brush is as easy as breaking it off.
Parts
-
-
Rotate the free leg forwards or backwards from the hole.
-
This relieves the pressure from the inside of the legs allowing you to freely remove the last leg from its hole.
-
-
-
Check each leg hole for debris and clear whats needed.
-
Insert a leg of the new brush into the correct hole, so the brush will click into its erect position.
-
Slide the other leg into its respective hole.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.