Black and Decker BDH9600CHV Filter Button Replacement

Written By: Ivette Muzquiz
  • Comments: 1
Black and Decker BDH9600CHV Filter Button Replacement

Difficulty

Easy

Steps

4

Time Required

15 minutes

Introduction

Sometimes the filter button can become jammed or broken. This guide shows how to take the housing apart and replace the filter button within the Black and Decker BDH9600CHV.

One thing to be aware of would be that the screws are deep within the outside of the housing so an extender could be needed to get to the screws.

  1. 6FHJwqn5JwgXLJZA
    6FHJwqn5JwgXLJZA
    2fJLNHidyKQGSEi5
    2wZEJNf6qtDTwxNT

    • To remove the filter and housing, press the green button labeled "Filter".

  2. xpJVdrgwAJ1kviDx

    • Unscrew and remove all 5 screws using the Phillips 0 screw bit. Each screw is 17.5 mm long.

  3. QFNvKXgelvjTLawY
    QFNvKXgelvjTLawY
    ifFCxSkYFpEB6p3w

    • Pull the housing apart.

    • Note when the housing is taken apart some parts may fall out be sure to keep track of any parts that come out.

    • Remove the filter button by pulling it out.

  4. EKlkQEtPeKjX4LgJ

    • Replace the new button by compressing the spring and placing it in the groove.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ivette Muzquiz

Member since: 06/11/17

349 Reputation

One comment

After a year of very light use, it was working great. Now I have been facing some troublesome it’s shutting down frequently as like after about a minute. I bought a new filter and it is still shut down. Kept on the charger all the time. Do you have any idea actually what is going wrong with it? Or do you have any suggestion which would be best for pet hair?

Alexis Martinovich -