Bissell OptiClean Cyclonic Vacuum Nozzle Replacement

Written By: Jorden Carroll
  • Comments: 1
Bissell OptiClean Cyclonic Vacuum Nozzle Replacement

Difficulty

Very easy

Steps

3

Time Required

30 seconds

Introduction

The vacuum comes with three hose attachments. To clean or remove blockages from hose attachments, it may be necessary to remove the hose and wand attachments.

  1. QMEW32DIGkY1YyNl

    • Place the vacuum upright and locate the nozzle attachment you want removed.

  2. aAH5WlHsVQTmsa3O
    aAH5WlHsVQTmsa3O
    AWXGJwHfZIHaQFYR

    • Slide the attachment off of the end of the wand.

  3. 4CpUQIJ4oTTebVOe
    4CpUQIJ4oTTebVOe
    FL6eyTEjVrYaPnKx

    • The brush nozzle attachment has two parts, which can be separated and replaced.

    • The front of the vacuum has slots to hold up to two vacuum attachments. To store, simply place the attachment in the framed slots.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jorden Carroll

Member since: 19/01/18

227 Reputation

One comment

- good job team

Austin Marshall -