Introduction
A damaged flex hose on your Bissell OptiClean Cyclonic Vacuum could be a reason that suction power is lost or low. If this is the case, it will be necessary to replace the damaged flex hose with a new one. This guide will teach you how to detach and replace the flex hose with handle on your Bissell OptiClean Cyclonic Vacuum.
-
-
Grab hold of both the flex hose handle and the extension wand.
-
Pull straight out to detach the handle from the extension wand.
-
-
-
Hold down the lock clip to unlock the flex hose from the vacuum.
-
Remove the flex hose from the vacuum.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
- color code this step to match the red indicator
-watch out for the lighting (hard shadows)
Austin Marshall -