Introduction
This guide will detail each step necessary to replace the brush roll on a Bissell Bolt ION 2-in-1 Cordless vacuum.
-
-
Push the release button on the back side of the device near the swivel head, to detach the swivel for convenient access to the brush roll.
-
-
-
The guard notch will automatically be down in the locked position.
-
Slide the guard notch to the unlocked position.
-
-
-
Lift up the latch to the right of the guard notch to access the brush.
-
While holding up the latch remove the brush.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.