Bella 4-Slice Toaster Oven Outer Shell Replacement

Written By: Pierce Hampton
  • Comments: 0
Bella 4-Slice Toaster Oven Outer Shell Replacement

Difficulty

Easy

Steps

8

Time Required

5 minutes

Introduction

Removing the black metal outer shell of the toaster is an important first step in replacing most major toaster components. This easy-to-follow guide makes it easy to remove and replace.

  1. KJtGtOtYL6AFdlUi

    • Remove five 11.6 mm Phillips #2 screws from the rear of the device.

  2. W6oXcKobDwUGKI5O

    • Open the front glass door of the toaster oven.

  3. mUiqsQQwCwXxYRm4

    • Locate retaining screw on the upper-middle portion of the door frame.

  4. ioDmBNOye2hvPuJc

    • Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.

  5. yv4KZHNmRTPjrSvy

    • Flip toaster onto back panel with feet facing forward.

  6. QcKkIPE1JFlT2ixb

    • Use spudger to pry the grey rubber inserts from the black plastic feet.

  7. G4DAlrbA5Ja6Bq25

    • Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.

  8. xVKIDitmcZaaxq63

    • Lift the black outer cover off of the toaster

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Pierce Hampton

Member since: 31/01/19

561 Reputation

0 comments