Introduction
This guide will show you how to replace a capacitor on a Beko DHR73431W Heat Pump Dryer. This can fix issues with the barrel not turning.
Tools
Parts
-
-
unscrew the 5 Phillips #2 cross-head screws for the side panel
-
Remove the 1 Phillips #2 cross-head screw on the bottom
-
Remove the 2 Phillips #21 cross-head screws from the top
-
-
-
Remove the 1 Phillips #2 cross-head screw for the capacitator that says 8 on it
-
Remove the two connectors on the side of the capacitor
-
Conclusion
To continue, put in your new capacitor then follow the steps in reverse.
