Base Replacement

Written By: Josh Showalter
  • Comments: 0
Base Replacement

Difficulty

Moderate

Steps

2

Time Required

5 minutes

Introduction

This guide shows the steps to replace the parts in the base.

  1. FpowwHuWBO1jDXeG
    FpowwHuWBO1jDXeG
    ytQTv1RfRfgX1BIK

    • Remove the four Phillips #0 screws (9.4mm) located at the bottom of the phone on the back side of the base.

  2. c1jZneNANmHWAWq6

    • Use the spudger to separate the bottom from the top.

    • There are two clips, located top and bottom, that you have to compress with the spudger.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Josh Showalter

Member since: 08/02/16

442 Reputation

0 comments