BOSCH MUM7000 replace torn belt

Written By: Moritz Graf
  • Comments: 0
BOSCH MUM7000 replace torn belt

Difficulty

Moderate

Steps

5

Time Required

1 hour

Introduction

The motor in the machine starts, but nothing moves? The belt is probably torn, which you can get for a lot of money from BOSCH or, if you know what to look for, from other dealers directly.
Here are the instructions for replacing the belts.

  1. iRdSGOeBdsWZBNCu
    iRdSGOeBdsWZBNCu
    XunAXEZed4uSUdcE

    • Open 4 cross screws

    • Loosen some plastic latches

    • Simply "pull off" the knob while or before opening the housing

  2. a54HBGIgPN53G2Gv
    a54HBGIgPN53G2Gv
    PgECC2F6vPrJS2rh

    • Loosen screw

    • Turn back the plastic-tensioner so that the gear seperates from the rest

  3. gMfplvnsytNZ5erO
    gMfplvnsytNZ5erO
    GvHREAaJDWhj26af

    • Pull the black cap off the axle

    • Flip the longer belt over the pulley

    • Unscrew 3 screws to remove the plastic cover

  4. oxceTHsMQEyawhA4
    oxceTHsMQEyawhA4
    NK3HFjStjKyDhFrT
    ODCHyLSrQoUnxZ3V

    • Lever out the clamps to remove the axle and take out the belts

    • Remove the clutch / gearbox

  5. NuGBvLg32p1ptWRs
    NuGBvLg32p1ptWRs
    FyyZioNahcSY5H5p
    fjdLSYNgSyFJpe6S

    • Insert new belts with the axle

    • Tension the 3M belts and reassemble everything

    • The rotation of the 5M belt determines the running direction! Do it as in the picture, so that this is correct.

Conclusion

Work through the steps in reverse order to reassemble your unit.

Author

Moritz Graf

Member since: 14/09/22

181 Reputation

0 comments