Introduction
-
-
Flip your phone over so the screen is facing down.
-
About half way down there is a small button with a few groves. Push this button in an upward fashion. This will release the battery from the back of the cell phone.
-
-
-
Once the battery has been removed, you will need a small Phillips 60 mm screwdriver. Remove the two 1.2mm Phillips #1 screws on the back of the phone.
-
Use a spudger tool to pry apart the phone. It may be a little difficult to pry open. Use the flat part of the spudger tool and go all around the phone. It will come apart.
-
-
-
Once you have the phone apart simply remove the key pad and replace it with the new one.
-
Don't forget to put the screws back in. Place the battery back on the phone.
-
Push the two parts of the phone back together. You will here a loud click when the phone is back together.
-
To reassemble your device, follow these instructions in reverse order.
