Audio Technica ATH-AD500 Right Headphone Cable Replacement

Written By: Melanie Reis
  • Comments: 5
Audio Technica ATH-AD500 Right Headphone Cable Replacement

Difficulty

Difficult

Steps

5

Time Required

20 - 30 minutes

Introduction

This repair guide will help you with the following:

  • install the right headphone cable
  • fix sound in right ear

  1. rpS5JvUHYDupqrjD

    • Remove the ear pads by peeling them away from the grill.

    My jbl waerless headphone speaker changes how price

    Max Mad -

    How to install the earpads

    rangaranju -

  2. e1ykEWrDhPKcE66K

    • Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.

  3. RITkRvUmZxWKwhZh

    • Remove the speaker from the grill by pulling it out.

    • Remove the speaker carefully so you do not rip the wires out.

  4. BZTHtJxujcJG35HN
    BZTHtJxujcJG35HN
    nBYKfEMOPGeeYuYI

    • Remove the wires by de-soldering both the red and yellow wires using the soldering iron and desoldering wick. If you need assistance, reference How To Solder and Desolder Connections.

    • The areas where you soldered will be hot so let the soldered joints cool for before handling again.

  5. iuTWOUZiTsFUTBlq
    iuTWOUZiTsFUTBlq
    AMMoIyByXbDYb65y

    • Connect the the new red and yellow wires by re-soldering the wires using the soldering iron. If you need assistance, reference How To Solder and Desolder Connections.

    • The areas where you soldered will be hot so let the soldered joints cool for before handling again.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Melanie Reis

Member since: 11/01/13

227 Reputation

3 comments

Where can i buy a replacement cable? Cant seem to find it anywhere.

Stefan Rasmussen -

Way late, but I would second information about finding a replacement cable.

Mateo Gomez -

Hey guys, if any of you managed to find the correct cable I would like to know :) I want to fix my A900Xs

Erez Dahan -