Introduction

Sometimes your camera can become damaged and need replacing. Note: if your device locates the camera, you may not actually need to replace the hardware. If you do, though, this guide is for you!

  1. G5StVMguwBuaTbF2
    • Using a flat blade, remove the two screw covers on the front of the bezel. They are attached by adhesive, so you may have to dig at it a little bit.

    this is poo it dont work dont buy it waste of money bad asus or should i say anus?

    jodete a tu madre.

    im mexican this didnt help me getting over trumps wall so f you

    Kevin Stolpe -

  2. vRSy3PpWx1idIvIH
    • Unscrew and remove the two Phillips #1 4.5 mm screws that are now visible.

  3. JyoX56TjW2kyKkRe
    • Using the plastic opening tool, carefully pry off the bezel. It will come off entirely, so be careful not to break it.

  4. pfWvU15ZqYwoGYf2
    • Using the spudger, disconnect the cable from the camera. The camera will then pop out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Beau Hansen

Member since: 28/09/17

836 Reputation

0 comments