Apple TV 3rd Generation Logic Board Replacement

Written By: Vincent Monteil
  • Comments: 5
Apple TV 3rd Generation Logic Board Replacement

Difficulty

Moderate

Steps

4

Time Required

10 - 15 minutes

Introduction

  1. IMZUMtDPSY64p23Y

    • As the device base is firmly clipped, insert two metal spudgers to gently release the first clips.

    where so i find a new base to replace it with

    sharpeEZz -

  2. kE1JcbNLWdbvAafS

    • Continue releasing the last plastic clips with your hands taking care not to break any of the plastic elements attached to the base.

  3. 3nioPNYkE66fxZwZ

    • Use a philips screwdriver to remove the 5 screws securing the metal heat sink. On Rev A (A1469) you need a T7 srewdriver

  4. NmuGhwGRKNOTegE6
    NmuGhwGRKNOTegE6
    PDMTacPZ1PjWdSrf

    • Disconnect the power supply connector from the logic board with a spudger.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Vincent Monteil

Member since: 06/07/13

6975 Reputation

4 comments

Where can I find a 3rd Generation Apple TV Logic Board?

Ricky Vaughn -

Good question! Did you manage to find a replacement?

Nathan Bugeja -

Hi my wifi and athernet is not working in apple tv on screen it showing your apple tv is connected to local network its not connect to internet now how should i repair this

Mohamed Iqbal Sayyed -

Mine too, where could I find a logic board replacement???

Juan Ignacio Gutierrez I. -