Apple TV 1st Generation Hard Drive Replacement

Written By: Celerityblur
  • Comments: 0
Apple TV 1st Generation Hard Drive Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

Replace your hard drive in your Apple TV 1st Generation.

  1. UFGomkPfFQvbiFUh

    • Remove the four T8 Torx screws securing the hard drive to the lower case.

  2. DJccLItAZAtMJrGA

    • Peel and remove the hard drive up off the lower case.

    • The hard drive is held on to the lower case with mild adhesive.

    • Disconnect the hard drive data cable from its socket on the hard drive.

    • If you are replacing your hard drive, ensure to transfer the hard drive data cable to your new hard drive.

    • Hard drive remains.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Celerityblur

Member since: 29/10/09

154 Reputation

0 comments