Introduction
This guide will go into the disassembly of the Aoson R103 as a pre-requisite for replacing any component.
Tools
-
-
Turn off the device using the power button.
-
Using fingernails/a pry tool, separate the back panel of the device. This may decent force as they are connected by push tabs.
-
-
-
Use your fingers to unclip the ribbon connecter and then pull the ribbon out of the connector.
-
This ribbon connects the power button and stops the device from turning on; allowing further procedure.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
