Introduction

The Amazon Echo Look's primary function as a fashion assistance can be affected if the front panel is cracked or if the lens is smudged on the inside or otherwise damaged.

Some steps are time-sensitive and may need to be repeated- the time estimate reflects this.

  1. TGwbm1ay2ZQKUJWG
    • Ensure the device is completely powered off and disconnected from any power source by removing the charger adapter point from the back of the device.

  2. rZPneHpTrqJPHIoB
    rZPneHpTrqJPHIoB
    SNHSY2eEMRW2EeXP
    XHG2yQRJnXFwE6UX
    • If the device stand is attached, remove it by twisting the device's base toward yourself until detached.

  3. HeQ5CSUxDW3NPv6D
    • Heat the front panel with an iOpener.

    • It may help to secure the iOpener to the device.

    • Heat the device for 5-10 minutes to loosen the glue.

    • CAUTION: The iOpener and the device may be hot.

  4. EnFuYjNRCZqllMe6
    EnFuYjNRCZqllMe6
    sGjNUCcyesHBy2YJ
    AyOyVHhnQSDD5LoP
    • Lever the Jimmy between the screen and the device until an opening is formed.

    • Insert opening picks to hold the opening as needed.

    • Use a spudger to circle the border of the front panel and disconnect any lingering glue.

    • Step 3 may need to be repeated as Step 4 is time-sensitive.

  5. a3gwANTxxvv2b4kM
    a3gwANTxxvv2b4kM
    efjFAugZwJOIsxNJ
    • Remove the front panel by levering the spudger at the top of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ryánn Gillen

Member since: 12/09/23

428 Reputation

0 comments