Akaso EK7000 4K Front Panel Replacement

Written By: Annie Sun
  • Comments: 3
Akaso EK7000 4K Front Panel Replacement

Difficulty

Easy

Steps

4

Time Required

3 minutes

Introduction

This guide will help you remove the front panel of your Akaso EK7000. You will need a metal spudger or any other tool for prying and separating.

  1. oMogMNDDWARGLAJL
    oMogMNDDWARGLAJL
    yTSiinQa1MJHHnrg

    • Locate the battery cover at the bottom of the camera. Use your fingers to gently pry open the battery cover.

    Does anyone know who sells the up and down bottom/WiFi for the akaso ek7000 4k HD camera.

    Paul Buckholz -

  2. vcFnht2EVVUIRpQi
    vcFnht2EVVUIRpQi
    AjlZogxAVSnEW6uu

    • Locate the small plastic flap attached to the battery. Pull the battery out towards you.

    When I insert the battery ,it doesn't work so I took the battery again and I notice the terminal inside wiggling and it went out when I tilt it. How can u fix it to place back the terminal.

    Pakito Santos -

    Akaso ek7000 4k up&down button stuck where can I buy the part.

    Paul Buckholz -

  3. hoElpLvEd4lDNVYg
    hoElpLvEd4lDNVYg
    YWYlTlv5XInCYiPN

    • Using the metal spudger, gently pry open the front panel from the exposed battery cartridge.

  4. Y6RkUKU2Va4gKOGx
    Y6RkUKU2Va4gKOGx
    Huy2CgdDmHK1gUTY

    • Remove the rest of front panel with your fingers or with assistance from the spudger.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Annie Sun

Member since: 06/02/19

436 Reputation

0 comments