Introduction

This guide will show you how to replace the battery in your Akaso EK7000. This is a simple procedure with no special tools needed although fingernails are recommended.

  1. oMogMNDDWARGLAJL
    oMogMNDDWARGLAJL
    yTSiinQa1MJHHnrg
    • Locate the battery cover at the bottom of the camera. Use your fingers to gently pry open the battery cover.

    Does anyone know who sells the up and down bottom/WiFi for the akaso ek7000 4k HD camera.

    Paul Buckholz -

  2. vcFnht2EVVUIRpQi
    vcFnht2EVVUIRpQi
    AjlZogxAVSnEW6uu
    • Locate the small plastic flap attached to the battery. Pull the battery out towards you.

    When I insert the battery ,it doesn't work so I took the battery again and I notice the terminal inside wiggling and it went out when I tilt it. How can u fix it to place back the terminal.

    Pakito Santos -

    Akaso ek7000 4k up&down button stuck where can I buy the part.

    Paul Buckholz -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Annie Sun

Member since: 06/02/19

436 Reputation

2 comments

Thank you for the help actclly needed that help

Charisma Broughton -

I’ve been using my Akaso EK7000 Pro as a dashcam, I removed the battery and plugged the camera into the cars cigar lighter, now when I insert the battery the cover won’t go back on.

The battery will push down into place but when I let go to put the cover on the battery moves up and the cover is about one tenth of one millimetre too high to fit.

The camera does get quite warm when in use and I suspect the plastic of the battery chamber has slightly distorted preventing the battery going fully into it and allowing the cover to be put into place.

Do you have any suggestions how I can resolve this issue?

Glynn Sole -