Adjust Nintendo DS picture

Written By: Patrick Stork
  • Comments: 2
Adjust Nintendo DS picture

Difficulty

Easy

Steps

6

Time Required

2 minutes

Introduction

In this guide, you can eliminate flickering from both screens

  1. guhpoPSoM6Nw5cLw

    • First check if the DS has image flickering. It is best to do this with a still image, such as the boot screen.

    • But make sure the backlight is on.

  2. 4eEpOqcRBpxmNXSa
    4eEpOqcRBpxmNXSa
    625VdReCfNdUMIAr

    • Loosen the Phillips #00 screw on the battery compartment

    • remove the cover

  3. RNpTTNOHykvC4VME

    • in these two openings are potentiometers responsible for the image.

    • Above is for the Upper LCD

    • Below for the Lower LCD

    • It's best to check both of them out.

  4. Now you can turn on the console and make sure the backlight is on.

    • Now you can turn on the console and make sure the backlight is on.

  5. H6NTsvwkHUKHGkXB

    • Then you can turn left and right with the Phillips #00 screwdriver to adjust the picture.

    • But always take a look at the screens to get a good picture

    • It is also important not to turn too fast and not too far. The trick is to do this slowly and gently.

  6. Tj5fhjTYdmKHnI3M

    • If everything fits and the LCD screens display the picture well, you can close the battery door.

Conclusion

Close the battery compartment with the battery inside

Author

Patrick Stork

Member since: 05/08/18

353 Reputation

2 comments

obrigado exelente

Andre Miranda -

BOA NOITE

Gostaria de saber se as telas superior e inferior sao iguais??

Andre Miranda -