Acer AL1714 Power Button Circuit Board Flat Flex Cables Replacement

Written By: Christopher Kelly
  • Comments: 0
Acer AL1714 Power Button Circuit Board Flat Flex Cables Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

  1. XHq6ymIAF3kRwnq4
    XHq6ymIAF3kRwnq4
    foUYBxAg6XmFLuDw

    • Turn the monitor facedown.

    • Unscrew the 5 screws holding the back cover on.

    • (This may require flipping the monitor and shaking the screws loose once they're already unscrewed)

  2. b4PCsaPrQjuDCrff
    b4PCsaPrQjuDCrff
    5sHNaFYq4TAXEHte
    D2MMSypGjgOn3mEA

    • Take the edge tool or a metal ruler and insert it into the bezel.

    • Apply pressure and push down.

    • Do the same to the right side.

    • Once side of bezel facing you is decoupled, take the back cover and pry it loose.

  3. iUFIbEKGd2XQbmMk
    iUFIbEKGd2XQbmMk
    XIGCP5XHo2mgWETL
    HyVx1xWwkFtqPJRU

    • Remove the Power Button Circuit board Flat Flex Cable from the Power Supply board under the metal cage.

    • Pull the cord back and out of the way.

    • (It may be stuck down with adhesive)

  4. RfEwXbPUIoLIi6ic

    • Remove the Flat Flex Cables from the Power Button Circuit Board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Christopher Kelly

Member since: 25/09/14

590 Reputation

0 comments