Introduction
The Nokia 3100b may not vibrate anymore when the phone is set in Vibrate mode. This guide will show you how to access the vibrating unit.
Tools
-
-
Press the button on the back of the phone and slide the back panel off.
-
Remove the battery by pulling it from the phone.
-
-
-
Gently pull back the small metal frame holding the SIM card into place, and lift open the frame.
-
-
-
Separate the front cover from the base of the phone.
-
Set the front cover, as indicated, aside.
-
-
-
Remove the screws indicated using a T6 Torx screwdriver.
-
Remove them in the order of the colors of the rainbow. (Red, Orange, Yellow, Green, Blue, Purple).
-
-
-
Separate the screen assembly from the base of the phone.
-
Set the screen assembly, as indicated, aside.
-
-
-
The vibrating unit is held in place by friction. Access the bottom of the unit and push upward to release it from the base.
-
To reassemble your device, follow these instructions in reverse order.
